A anycast address B. global unicast address C. multicast address D

Correct Answer: B
JSON data is written as name/value pairs.
A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value:
"name":"Mark"
JSON can use arrays. Array values must be of type string, number, object, array, boolean or null..
For example:
{
"name":"John",
"age":30,
"cars":[ "Ford", "BMW", "Fiat" ]
}

12 Refer to the exhibit.

which path is used by the router for internet traffic ?
A. 10.10.13.0/24
B. 0.0.0.0/0
C. 10.10.10.0/28
D. 209.165.200.0/27

Correct Answer: B

13 Refer to the exhibit.

The router has been configured with a supernet to accommodate the requirement for 380 users on a subnet The requirement already considers 30% future growth. Which configuration verifies the IP subnet on router R4?
A)

B)

C)

D)

A. Option B
B. Option C
C. Option D
D. Option A
Correct Answer: A
14 A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet?
A. ip route 10.10.1.0 255.255.255.240 10.10.255.1
B. ip route 10.10.1.20 255.255.255.254 10.10.255.1
C. ip route 10.10.1.16 255.255.255.252 10.10.255.1
D. ip route 10.10.1.20 255.255.255.252 10.10.255.1
Correct Answer: D
15 Refer to the exhibit.

Which configuration issue is preventing the OSPF neighbor relationship from being established between the two routers?
A. R1 has an incorrect network command for interface Gi1/0
B. R2 is using the passive-interface default command
C. R2 should have its network command in area 1
D. R1 interface Gil/0 has a larger MTU size
Correct Answer: D

16 Which interface mode must be configured to connect the lightweight APs in a centralized architecture?

A. access
B. trunk
C. management
D. WLAN dynamic
Correct Answer: A
17 Refer to the exhibit.

Routers R1 and R3 have the default configuration The router R2 priority is set to 99 Which commands on R3 configure it as the DR in the 10.0 4.0/24 network?
A. R3(config)#interface Gig0/1 R3(config-if)#ip ospf priority 0
B. R3(config)#interface Gig0/0 R3(config-if)i=ip ospf priority 1
C. R3(config)#interface Gig0/0 R3(config-if)#ip ospf priority 100
D. R3(config)#interface Gig0/1 R3(config-if)#ip ospf priority 100
Correct Answer: D
What are two functions of a Layer 2 switch? (Choose two)
A. makes forwarding decisions based on the MAC address of a packet
B. selects the best route between networks on a WAN
C. acts as a central point for association and authentication servers
D. moves packets between different VLANs
E. moves packets within a VLAN