Basic Hand Tools for the aircraft newcomers

Practice: Identify each screwdriver

Download 9,28 Mb.

1 2 3 4 5 6 7 8

Bog'liq
Aircraft basic Hand Tools

Offset and stubby screwdrivers are good I tight places. For example, a stubby screwdriver is needed for loosening screws inside a glove box. Starting screwdrivers hold the screws securely until started in its hold. They prevent the screw from being dropped or lost.

An Impact Driver can be used to loosed extremely tight screws.
When struck with a hammer, the driver exerts powerful turning and downward forces.
When selecting a screwdriver, pick one that is wide and thick enough to completely fill the screw slot. If too large or too small, damage to the screwdriver or screw may occur.
Most screwdrivers are not designed to be hammered on or pried with.

Pliers are used to grip, cut,crimp, hold, and been various parts. Different pliers are helpful for different situations.
Combination pliers, or slip joint pliers, are the most common pliers used. The slip joint allows the jaws to be adjusted to grasp different size parts.
Rib Joint pliers or Channel lock pliers, or water pump pliers open extra wide for holding very large objects.
Needle nose pliers are excellent for handling extremely small parts or reaching into highly restricted areas.
Diagonal cutting pliers are the most commonly used cutting pliers. The jaw shape allows cutting flush with a surface
Locking pliers, or vise grips, clamp onto and hold a part.
Snap ring pliers have sharp pointed tips for installing and removing special clips called snap rings.

Download 9,28 Mb.

Do'stlaringiz bilan baham:

1 2 3 4 5 6 7 8